Air Compressors

The FAS product range includes air cooled, single stage silenced and packaged screw compressors in the power range of 15 - 250kW. These compressors are designed for industrial application and 24x7 continuous duty. All models are driven by highly efficient IE3 efficiency class electric motors.

The FAS product range includes air cooled, single stage silenced and packages screw compressors in the power range of 4 - 11kW. These compressors are designed for industrial application and 24x7 continuous duty. All models are driven by highly efficient IE3 efficiency class electric motors.

As an option, FAS compressors are available with pre-assembled accessories like

• 4Air receiver 
• Refrigeration Dryer 
• Pre & post down stream filters

EXCELLENT QUALITY

High quality components in combination with decades of experience in building air ends ensure durability with constantly high efficiency.

INTEGRATED OIL SEPARATOR IN THE OIL TANK

The large oil tank is equipped with all necessary connections and safety installations and therefore ensures the highest operational safety. The internal high efficiency oil separator guarantees excellent compressed air quality with a remaining oil content of < 3mg/m3.

Through an inspection glass the oil level can be controlled at all times. Service can be conducted quickly and safely – the inlet neck as well as the oil drain valve can be easily accessed.

HIGH PERFORMANCE SUCTION FILTER

In all models a high performance suction filter is installed. Sucked particles are filtered in two stages: first by centrifugal forces and second by a high efficiency filter element.

ELECTRIC MOTOR

The driving motor conforms to energy efficiency class IE3, protection class IP55, insulation class F and is thus most suited for rugged, continuous duty industrial application, with highest efficiency.

HIGH EFFICIENCY COOLING

The cooling system for both air and oil is designed in a way that the compressor can efficiently operate even at high ambient temperature of 45°C.

Features

• Valve Assembly - All units use large disc-type valves made from swedish steel for high efficiency and long durability.


• After Cooler - The copper tube is fitted with high-efficiency cooling fins that effectively reduce gas working temperature and increase air compression efficiency.


• Rings - Long life industrial design compression and oil control rings are used to assure maximum performance


• Long-Life Cylinder - Precision-machined cylinder walls are honed glass-smooth to reduce friction and wear to a minimum. Extra-deep fins provide increased cooling and greater strength.


• Continuous Running Unloader - For continuous-running air compressors. Unloader lets the unit idle load-free until air supply drops to cut-in pressure; automatically lets unit idle again after high pressure limit is reached. (Tubing and fittings are not included on bare pumps)


• Balanced Fan-Type Flywheel - Airfoil-type spike provides a continuous powerful blast of cooling air for all parts of the compressor. Balanced flywheel provides smooth vibration less operation.


• Cool Cylinder Head - Deep directional fins provide quick cooling. Compact streamlined air passages in the cylinder head permit fast, efficient flow of cooler intake and rapid removal of discharge air.

Options

• Wheel mounted compressor on tank


• Base mounted compressor


• Special application compressor


• Compressor with non-standard tanks

Standard Features

• Powder-coat painted enclosure
• Laminated oil-proof sound insulation
• Washable cabinet pre-filtration panels
• AIMS alphanumeric controller
• Encapsulated airend
• 24VDC control voltage transformer
• Spin-on oil filter and air/oil separator
• TEFC IP54/55 motor
• Multi-function inlet valve
• Closed inlet starting
• Vibration isolators
• Full-voltage motor starter (5-7.5HP, 4-5.5kW)
• Wye-Delta motor starter (10-15HP, 7.5-11kW)
• Factory fill synthetic lubricant
• Air-cooled oil cooler
• Air-cooled after cooler (10-15HP, 7.5-11kW)

Optional Features & Equipment

• Tank mounted and refrigerated dryer mounted models
• Automatic and time solenoid condensate drains

Standard Features

• Powder-coat painted enclosure
• Laminated oil-proof sound insulation
• Four keyed side panels
• Washable cabinet pre-filtration panels
• AIMS alphanumeric controller
• BSA airend
• 220V AC control voltage transformer
• Spin-on oil filter
• High efficiency air/oil separator
• Premium efficiency TEFC (IP54/55) motor
• Wye-Delta motor starter
• Multi-function inlet valve
• Closed inlet starting
• Multi-function discharge valve
• Vibration isolators
• Factory fill synthetic lubricant
• Air-cooled oil cooler and aftercooler

OPTIONAL EQUIPMENT

• Moisture separator with automatic drain
• Air treatment and energy management systems
• Dewpoint to 3° C refrigerated air dryers
• Dewpoint to -100° C desiccant air dryers
• Particulate and coalescing filters and oil/water separators

• Units available upto 500HP. Details on request.
• Noise level measured as per latest version ISO 2151 in free field condition.
• FAD measured as per latest version of ISO 1217.